Hylam
Cotton-fabric reinforced phenolic for mechanical insulation
Hylam is a cotton-fabric reinforced phenolic laminate offering good mechanical strength and electrical insulation at a lower cost than glass-based laminates. MK Industrial & Co.® supplies Hylam sheets, rods and tubes across Bangalore and Karnataka.
About Hylam
Hylam is a cotton-fabric (or paper) reinforced phenolic laminate offering good mechanical strength, moisture resistance, and electrical insulation — a cost-effective alternative to glass-based laminates where extreme dielectric performance isn't required.
MK Industrial & Co.® stocks Hylam, Electrical Grade Hylam, Paper Base Hylam, and Fabric Base Hylam in sheets, rods and tubes — available in standard dimensions and custom cut-to-size across Bangalore and Karnataka.
Hylam is commonly used in gears, bearings, musical instruments, washers, spacers, and general mechanical insulation parts.
Key Properties
| Property | Value |
|---|---|
| Density | 1.25–1.45 g/cm³ |
| Flexural Strength (perpendicular to lamination) | ≥117.6 MPa |
| Tensile Strength | ≥78.4 MPa |
| Insulation Resistance (after water immersion) | ≥1.0×10⁴ Ω |
| Voltage Endurance (parallel to lamination) | ≥10.0 kV |
| Water Absorption (13mm thickness) | ≤1.0% |
| Temperature Index | 120°C |
* Values above are from our supplier technical data sheet for Fabric Base Hylam Rod, grade 3721. Other grades (3721B, 3722–3725) vary — full data sheets available on request.
Available Grades
Typical Applications
MK Industrial & Co.®
Premium engineering polymers — sheets, rods & tubes — supplied and custom-cut across Karnataka & India since 2020.